Sliding door EI 120 – 2 leaves with the possibility to insert a pedestrian door (Crosswalk 120) – CE – Smoke-tightness “Sa”
Complies with EN 16034:2014 and 13241:2016 – Complies with EN 1634-1
Consisting of :
PANELS: made in modules to be assembled, total thickness 80 mm.
INSULATION: internal insulation made from rigid panels of high-density material to form a monolithic structure.
LABYRINTH: perimeter sealing in shaped steel profile with heat-expanding gaskets, pre-drilled for anchoring to masonry with expansion plugs (not included in the supply).
UPPER SINGLE RAIL: horizontal sliding rail made from 40/10 thick press-bent steel and pre-drilled for anchoring to the masonry with expansion plugs (not included in the supply).
CARRIAGE: sliding on double ball bearing wheels.
GUIDE: lower molded inside the panel where the olive fixed to the floor slides. CARTER: guideway cover (for upper monorail) in press-bent sheet steel.
AUTOMATIC SECONDARY LEAF LOCKING DEVICE
COUNTERWEIGHT: closing protected by press-bent sheet steel carter with counter-batten and pre-drilled for anchoring to the masonry with expansion plugs (not included in the supply).
HANDLE: recessed on both sides of the sashes.
HOT SMOKE GASKET: placed on the labyrinths, on the guide, on the carriages and on the counterweight.
COLD SMOKE TIGHTNESS “Sa”: placed on the labyrinths, on the guide, on the carriages and on the counterweight.
OPERATION: standard with electromagnet.
PAINTING: embossed epoxy powder coating RAL 7035 (light grey).
PEDESTRIAN DOOR: inserted in the optional door.
ACCORDING TO THE NORMS UNI EN 16034:2014 et 13241:2016
CE MARKING – DECLARATION OF PERFORMANCE (Dop)
|FIRE RESISTANCE||EN 1634-1||EI2 120|
|WIND RESISTANCE||EN 12444-13241||4|
|HEAT TRANSMISSION VALUE||EN 12428-EN13141||1,21W/m2 K|
|MECHANICAL ASPECTS||EN 13241||PASSA|
|SMOKE SEAL “Sa”||EN 1634-1||Sa|